clock oscillators iqd frequency products ltd, station road, crewkerne, somerset ta18 8ar, united kingdom tel: +44 (1460) 270200; fax: +44 (1460) 72578; email: info@iqdfrequencyproducts.com web: www.iqdfrequencyproducts.com iqxo-415 clock oscillators issue 8; 3 april 2009 - rohs 2002/95/ec description 14-pin dil compatible resistance welded enclosure, ? hermetically sealed with glass to metal seal package outline 14-pin dil ? frequency range 250khz to 80mhz ? output compatibility & load tri-state hcmos/ttl ? drive capability: 50pf max or 10ttl ? frequency tolerance @ 25c 5ppm or 10ppm ? frequency stabilities 15ppm, 25ppm, 50ppm (over operating temperature ? range) frequency stability inclusive of: frequency tolerance (as above) ? voltage variation: < 0.5ppm ? load variation: < 0.5ppm (< 60.0mhz) ? load variation: < 1.0ppm (> 60.0mhz) ? ageing for 5 years: < 5ppm ? operating temperature ranges 0 to 70c (iqxo-415) ? C40 to 85c (iqxo-415i) ? storage temperature range C55 to 125c ? tri-state operation no connection or logic 1 to pin 1 enables oscillator output ? logic 0 to pin 1 disables oscillator output; when disabled the ? oscillator output goes to the high impedance state disable current 50a typical ? environmental acceleration: 490m/s ? 2 for 1 minute in the y1 plane bump: 4000 bumps at 390m/s ? 2 in each of the three mutually perpendicular planes hermetic seal: not to exceed 1 x 10 ? -8 mbar litres of helium leakage humidity: steady state: in accordance with test ca of iec ? 60068-2-3, for 56 days at 40c at a relative humidity of 93%, cyclic: in accordance with test db variant 1 of iec 60068-2-30, at severity (b), 55c for six cycles shock: 981m/s ? 2 for 6ms, three shocks in each direction along the three mutually perpendicular planes solderability: bs2011 test ta ? thermal shock: 10 cycles from C55 to 125c ? vibration: 10 to 60hz 0.75mm displacement, 60 to 2000hz ? 98.1m/s 2 acceleration, 30 minutes in each of three mutually perpendicular planes outline (mm) pin connections 1. enable/disable 7. gnd 8. output 14. +vs 5.1 max 4.0 min 0.8 max ? 0.45 7.62 13.08 max 15.24 21.0 max 1 7 14 8 output waveform t r t f t t 90%vs 10%vs 50%vs 0v +vs 2.4v 0.4v duty cycle = t x 100(%) t 1.4v marking includes iqd + model number + frequency stability code + ? frequency tolerance code (optional) + frequency + date code packaging bulk ? minimum order information required frequency + model number + operating temperature (if ? applicable) + frequency stability
clock oscillators iqd frequency products ltd, station road, crewkerne, somerset ta18 8ar, united kingdom tel: +44 (1460) 270200; fax: +44 (1460) 72578; email: info@iqdfrequencyproducts.com web: www.iqdfrequencyproducts.com electrical specifcations - maximum limiting values frequency range frequency stability supply voltage supply current rise time (tr) fall time (tf) duty cycle model number 250.0khz to <8.0mhz 15ppm, 25ppm, 50ppm 5v 0.5v 5ma 10ns 10ns 45/55% iqxo-415, -415i 8.0mhz to <23.0mhz 10ma 5ns 5ns 23.0mhz to 80.0mhz 65ma 3ns 3ns ordering example 35 .0mhz iqxo-415 i b d frequency model number: -415, -415i operating temperature code: i = C40 to 85c not applicable for 0 to 70c frequency stability: a = 25ppm, b = 50ppm, n = 15ppm (only available for 0 to 70c) frequency tolerance @ 25c: d = 5ppm, e = 10ppm please note: code combination n e is not available test circuit +vs 15pf* a v oscilloscope frequency counter *inclusive of jigging and equipment capacitance note: pin 1 = no connection on non tri-state models oscillator 1 7 14 8 0.1 f
|